Just In
3/29/2024
Purchase USB Data Recovery Software

3/29/2024
ToolsBaer MSG to Office 365 Importer

3/29/2024
Sony Digital Camera Pictures Recovery

3/29/2024
Digital Picture Restoration Tool

3/29/2024
Softaken Access Recovery

3/29/2024
Fat Data Restore App

3/29/2024
Free Pictures Recovery Software

3/29/2024
USB Files Recovery Program

3/29/2024
Pen Drive Undelete Application

3/29/2024
Data Recovery Flash Drive

   
  All        Any      Web  Title +  Description 
 Shareware Listings 
Rating:   0  
   Total Hits - 40  |  Hits Today - 0View Ratings  |  Add Your Rating
 
 
 The calculation is designed for a geometrical design and strength check of common chain transmissions using roller chains. Application is developed in MS Excel, is multi-language, supports Imperial and Metric units and solves the following tasks: - Selection of a power suitable type of chain. - Selection of an optimum transmission alternative regarding power, geometry and weight. - Calculation of geometric, strength, safety and operational parameters. - Calculation of power parameters and axis loads. - Support of 2D and 3D CAD (AutoCAD, AutoCAD LT, IntelliCAD, Ashlar Graphite, TurboCAD, BricsCAD, ZWCAD, ProgeCAD, Autodesk Inventor, SolidWorks, SolidEdge, Creo). The application includes corresponding databases of roller chains. The calculations use data, procedures, algorithms and data from ANSI/ASME, ACA (American Chain Association) ISO, DIN, BS and JIS. Used standards: ANSI/ASME B29.1M (Dec2001), ANSI/ASME B29.3, DIN 8187, DIN 8181, DIN 8181, DIN 8164, DIN 8150, ISO R606, ISO 1275, BS 228, JIS B1801, JIS B1803. This module is a part of MITCalc - Mechanical and Technical Calculation Package for gear, belt and chain drives, springs, beam, shaft, bolt connection, shaft connection, tolerances and many others
 http://www.mitcalc.com/index.htmLast Updated on 8/2/2017 5:29:00 PM
 DownloadVersion 1.21
Rating:   0  
   Total Hits - 43  |  Hits Today - 0View Ratings  |  Add Your Rating
 
 
 This module can be used for the selection, calculation and check of rolling bearings of the company SKF. The programme provides solutions to the following tasks: - Selection and check of a suitable bearing. The document includes a database of approx. 10,000 different rolling bearings SKF in all basic types and design. - Calculation of basic bearing parameters (life, static safety, etc.). - Calculation of adjusted bearing life acc. to the new methodology of ISO 281. - Calculation of load with a pair of tapered roller bearings or a pair angular contact ball bearings resp. - Support of 2D and 3D CAD (AutoCAD, AutoCAD LT, IntelliCAD, Ashlar Graphite, TurboCAD, BricsCAD, ZWCAD, ProgeCAD, Autodesk Inventor, SolidWorks, SolidEdge, Creo). In addition to the above given basic calculations, the document also includes several other auxiliary calculations (e.g. a calculation of lubricant operational viscosity, calculation of mean loads for bearings loaded by variable loads, calculation of permitted bearing speed, etc.). The programme uses data, procedures, algorithms and other information from specialised literature, catalogues of rolling bearings SKF, ISO, ANSI, SAE standards and other sources. Related standards: ISO 15, ISO 76, ISO 104, ISO 281, ISO 355, ISO 1132, ISO 5593, ISO 5753, ISO 3448, ISO 15312, DIN 615, DIN 620, DIN 625, DIN 628, DIN 630, DIN 635, DIN 711, DIN 715, DIN 720, DIN 722, DIN 728, BS 290, BS 292, BS 3134. This module is a part of MITCalc - Mechanical and Technical Calculation Package for gear, belt and chain drives, bearings, springs, beam, shaft, bolt connection, shaft connection, tolerances and many others.
 http://www.mitcalc.com/index.htmLast Updated on 7/29/2017 2:39:00 PM
 DownloadVersion 1.20
Rating:   0  
   Total Hits - 38  |  Hits Today - 0View Ratings  |  Add Your Rating
 
 
 This module can be used for the selection, calculation and check of rolling bearings. The programme provides solutions to the following tasks: - Selection and check of a suitable bearing. This module includes a database of approx. 5,000 inch rolling bearings from RBC Bearings, Nice Ball Bearing, General Bearing Company, New Hampshire Ball Bearing, NMB USA Inc., MRC Bearing Group, Fafnir Bearings Company, Torrington Company, Timken Company, Barden Precision Bearing, McGill Manufacturing Co. Inc., NTN Bearing Corporation and INA USA Corporation - Calculation of basic bearing parameters (life, static safety, etc.). - Calculation of adjusted bearing life acc. to the new methodology of ISO 281. - Calculation of load with a pair of tapered roller bearings or a pair angular contact ball bearings resp. - Support of 2D and 3D CAD (AutoCAD, AutoCAD LT, IntelliCAD, Ashlar Graphite, TurboCAD, BricsCAD, ZWCAD, ProgeCAD, Autodesk Inventor, SolidWorks, SolidEdge, Creo). In addition to the above given basic calculations, the document also includes several other auxiliary calculations (e.g. a calculation of lubricant operational viscosity, calculation of mean loads for bearings loaded by variable loads, calculation of permitted bearing speed, etc.). The programme uses data, procedures, algorithms and other information from specialised literature, catalogues of rolling bearings SKF, ISO, ANSI, SAE standards and other sources. Related standards: ISO 15, ISO 76, ISO 104, ISO 281, ISO 355, ISO 1132, ISO 5593, ISO 5753, ISO 3448, ISO 15312, DIN 615, DIN 620, DIN 625, DIN 628, DIN 630, DIN 635, DIN 711, DIN 715, DIN 720, DIN 722, DIN 728, BS 290, BS 292, BS 3134, ANSI/ABMA 9-1990, ANSI/ABMA 11-1990. This module is a part of MITCalc - Mechanical and Technical Calculation Package for gear, belt and chain drives, bearings, springs, beam, shaft, bolt connection, shaft connection, tolerances and many others.
 http://www.mitcalc.com/index.htmLast Updated on 8/1/2017 3:46:00 PM
 DownloadVersion 1.20
Rating:   0  
   Total Hits - 38  |  Hits Today - 0View Ratings  |  Add Your Rating
 
 
 This calculation can be used for the selection, calculation and check of rolling bearings of the company FAG, INA. The programme provides solutions to the following tasks: - Selection and check of a suitable bearing. The document includes a database of approx. 10,000 different rolling bearings SKF in all basic types and design. - Calculation of basic bearing parameters (life, static safety, etc.). - Calculation of adjusted bearing life acc. to the new methodology of ISO 281. - Calculation of load with a pair of tapered roller bearings or a pair angular contact ball bearings resp. - Support of 2D and 3D CAD (AutoCAD, AutoCAD LT, IntelliCAD, Ashlar Graphite, TurboCAD, BricsCAD, ZWCAD, ProgeCAD, Autodesk Inventor, SolidWorks, SolidEdge, Creo). In addition to the above given basic calculations, the document also includes several other auxiliary calculations (e.g. a calculation of lubricant operational viscosity, calculation of mean loads for bearings loaded by variable loads, calculation of permitted bearing speed, etc.). The programme uses data, procedures, algorithms and other information from specialised literature, catalogues of rolling bearings FAG, INA, ISO, ANSI, SAE standards and other sources. Related standards: ISO 15, ISO 76, ISO 104, ISO 281, ISO 355, ISO 1132, ISO 5593, ISO 5753, ISO 3448, ISO 15312, DIN 615, DIN 620, DIN 625, DIN 628, DIN 630, DIN 635, DIN 711, DIN 715, DIN 720, DIN 722, DIN 728, BS 290, BS 292, BS 3134. This module is a part of MITCalc - Mechanical and Technical Calculation Package for gear, belt and chain drives, bearings, springs, beam, shaft, bolt connection, shaft connection, tolerances and many others.
 http://www.mitcalc.com/index.htmLast Updated on 8/5/2017 11:39:00 AM
 DownloadVersion 1.18
Rating:   0  
   Total Hits - 39  |  Hits Today - 0View Ratings  |  Add Your Rating
 
 
 The calculation is designed for geometric designs and strength checks of shaped couplings of shafts with hubs. The application provides solutions for the following tasks: - Design of a coupling with parallel side keys. - Design of a coupling with Woodruff''s keys. - Design of a coupling with straight-sided splines. - Design of a coupling with involute splines. - Strength check of designed couplings. - The application includes a table of keys and splines according to ISO, SAE, DIN, BS, JIS and CSN. - Support for 2D CAD systems (AutoCAD, AutoCAD LT, IntelliCAD, Ashlar Graphite, TurboCAD, BricsCAD, ZWCAD, ProgeCAD). The calculation is based on data, procedures and algorithms from specialized literature and standards ANSI, ISO, DIN and others. List of standards: ANSI B17.1, ANSI B17.2, ANSI B92.1, ANSI B92.2M, ISO R773, ISO 14, ISO 4156, DIN 6885, DIN 6888, DIN 5464, DIN 5471, DIN 5472, DIN 5480, BS 4235, BS 6, JIS B 1301, CSN 02 2562, CSN 30 1385, CSN 01 4942, CSN 4950 The calculation contain also solution for Involute splines. Involute splines The calculation is designed to create a detail drawing (model) of the involute spline. Support of 2D and 3D CAD systems. Drawings of an accurate tooth shape including data (X,Y coordinates). This module is a part of MITCalc - Mechanical and Technical Calculation Package for gear, belt and chain drives, springs, beam, shaft, bolt connection, shaft connection, tolerances and many others.
 http://www.mitcalc.com/index.htmLast Updated on 7/31/2017 10:43:00 AM
 DownloadVersion 1.23
Rating:   0  
   Total Hits - 41  |  Hits Today - 0View Ratings  |  Add Your Rating
 
 
 The calculation is designed for geometrical design and complex strength check of shafts. Application is developed in MS Excel, is multi-language, supports Imperial and Metric units and solves the following main tasks: - Simple definition of installed shafts, including hollow ones. - Options of definitions of necking-down, recesses, grooves and calculation of the relevant coefficients of stress concentration. - Simple definition of spatial shaft load. - Calculation of reactions, courses of forces, moments, stress, deflection and bending angle of the shaft and others. - Calculation of critical speed and safety coefficients. - Support of 2D and 3D CAD (AutoCAD, AutoCAD LT, IntelliCAD, Ashlar Graphite, TurboCAD, BricsCAD, ZWCAD, ProgeCAD, Autodesk Inventor, SolidWorks, SolidEdge, Creo). The calculation is based on data, procedures, algorithms and data from specialized literature and standards AGMA, ISO, DIN and BS. List of standards (DIN 743).This module is a part of MITCalc - Mechanical and Technical Calculation Package for gear, belt and chain drives, springs, beam, shaft, bolt connection, shaft connection, tolerances and many others.
 http://www.mitcalc.com/index.htmLast Updated on 7/29/2017 5:29:00 PM
 DownloadVersion 1.24
Rating:   0  
   Total Hits - 40  |  Hits Today - 0View Ratings  |  Add Your Rating
 
 
 The program is designed to calculate the optimum cross-section and perform strength check of slender struts strained for buckling. The program includes: - Selection of six basic types of buckling. - Calculation of area characteristics of 20 types of cross-sections. - Design of optimum profile accommodating the set load. - Strength check of the strut. - Calculation and graphical representation of permitted stress dependent on slenderness rate. - A table of materials and a table of area characteristics of W, S, C and L profiles according to ANSI/AISC and I, U, L and T profiles according to DIN/ISO. The calculation is based on data, procedures, algorithms (Johnson, Tetmajer, Euler, Secant) and data from specialized literature and AISC, ISO, DIN and BS standards. List of standards (DIN 1025, 1026, 1028, 1029, 1024, AISC W, S, C, L, LU ... ) This module is a part of MITCalc - Mechanical and Technical Calculation Package for gear, belt and chain drives, springs, beam, shaft, bolt connection, shaft connections, tolerances and many others
 http://www.mitcalc.com/index.htmLast Updated on 7/31/2017 12:51:00 PM
 DownloadVersion 1.20
Rating:   0  
   Total Hits - 36  |  Hits Today - 0View Ratings  |  Add Your Rating
 
 
 Geometric design and strength check of spur gear with straight and helical toothing. Application is developed in MS Excel, is multi-language and supports Imperial and Metric units and solves the following main tasks: - Calculation of helical and straight toothing. - Automatic design of a transmission with the minimum number of input requirements. - Design for entered coefficients of safety (static, dynamic). - Calculation of complete geometric parameters (including corrected toothing). - Optimization of toothing by use of proper correction (balancing specific slips, miminizing specific slips, strength...). - Calculation of strength parameters, safety check. - Design of gearing for exact axis distance. - Complete calculation of tolerances in accordance with ISO 1328 (ANSI/AGMA 2015-1-A01) - Simple defining of the new materials according ISO 6336-5 (ANSI/AGMA 2001--D04) - Comprehensive theoretical part in the documentation. - Supplementary calculations (calculation of parameters of the existing gear, temperature rise, design of shafts, check dimensions). - Drawings of an accurate tooth shape including data (X,Y coordinates). - Support of 2D and 3D CAD systems. (AutoCAD, AutoCAD LT, IntelliCAD, Ashlar Graphite, TurboCAD, BricsCAD, ZWCAD, ProgeCAD, Autodesk Inventor, SolidWorks, SolidEdge, Creo). The calculations use procedures, algorithms and data from standards ANSI, ISO, DIN, BS and specialized literature. Used standards: ISO 6336-1:2006; ISO 6336-2:2006; ISO 6336-3:2006; ISO 6336-5:2006, ISO 1265; ISO 1328-1:1997; ISO 1328-2:1997; ISO 1122-1:1998, ANSI/AGMA 2001-D04 , AGMA 908-B89, ANSI/AGMA 2015- 1-A01, ANSI/AGMA 2015-2-A06 This module is a standalone part of MITCalc - Mechanical and Technical Calculation Package for gear, belt and chain drives, springs, beam, shaft, bolt connection, shaft connection, tolerances and many others.
 http://www.mitcalc.com/index.htmLast Updated on 7/30/2017 11:56:00 AM
 DownloadVersion 1.24
Rating:   0  
   Total Hits - 39  |  Hits Today - 0View Ratings  |  Add Your Rating
 
 
 The calculation is intended for the purposes of geometric and strength designs of helical tension cylindrical springs made of wires and rods of circular sections, loaded with static loading. . Application is developed in MS Excel, is multi-language, supports Imperial and Metric units and solves the following main tasks: - Automatic design of the spring. - Selection of an optimal alternative of the spring design in view of strength, geometry and weight. - Strength check of the spring. - Support for Cold formed springs and Hot formed springs - Calculation of working forces of a spring of known production and mounting dimensions. - Calculation of mounting dimensions for a known loading and production parameters of the spring. - The application includes a table of commonly used spring materials according to ISO, ASTM/SAE, DIN, BS, JIS and others. - Support of 2D and 3D CAD (AutoCAD, AutoCAD LT, IntelliCAD, Ashlar Graphite, TurboCAD, BricsCAD, ZWCAD, ProgeCAD, Autodesk Inventor, SolidWorks, SolidEdge, Creo). The calculation is based on data, procedures and algorithms from specialized literature and standards EN 13906-2, DIN 2089-2, DIN 2097. This module is a part of MITCalc - Mechanical and Technical Calculation Package for gear, belt and chain drives, springs, beam, shaft, bolt connection, shaft connection, tolerances and many others.
 http://www.mitcalc.com/index.htmLast Updated on 8/3/2017 9:37:00 AM
 DownloadVersion 1.22
Rating:   0  
   Total Hits - 40  |  Hits Today - 0View Ratings  |  Add Your Rating
 
 
 The calculation is designed for a geometrical design and strength check of toothed belt transmissions. Application is developed in MS Excel, is multi-language, supports Imperial and Metric units and solves the following main tasks: - Selection of the type of belt with a suitable output power. - Selection of an optimum transmission alternative in view of power, geometry and weight. - Option of designing a non-standard transmission. - Calculation of all necessary strength and geometrical parameters. - Calculation of power parameters and axis loads. - Support of 2D and 3D CAD ((AutoCAD, AutoCAD LT, IntelliCAD, Ashlar Graphite, TurboCAD, BricsCAD, ZWCAD, ProgeCAD, Autodesk Inventor, SolidWorks, SolidEdge, Creo). The application works with CAD systems and includes the respective models of pulleys and belts. The calculations use procedures, algorithms and data from ANSI, RMA (Rubber Manufacturers Association), ISO, DIN, BS and basic documents from catalogues of companies ContiTech(r) and Gates Rubber Company(r). The database of belts includes the 20 most frequently used types of toothed belts. Used standards: Synchronous Belts ANSI/RMA IP-24, 1983; DIN 7721; DIN ISO 5296; ISO 5295; ISO 5294 This module is a part of MITCalc - Mechanical and Technical Calculation Package for gear, belt and chain drives, springs, beam, shaft, bolt connection, shaft connection, tolerances and many others.
 http://www.mitcalc.com/index.htmLast Updated on 7/30/2017 5:39:00 PM
 DownloadVersion 1.21
Previous    1  2  3  4  5     Next 

Categories

778
Programs 73163
Current Users 85

Add to Favorite

Tell a friend about us Tell a Friend

Contact Us

Syndication


 

3/29/2024 5:40:24 AM
Powered by Reviewnow